NOTES ON ASSEMBLY:
-DURING THE ASSEMBLY PROCESS WHENEVER USING SCREWS OR BOLTS, CHECK EACH BY PLACING
THE SCREW/BOLT ON THE DIAGRAM OF THE ITEM WHICH IS DRAWN ACTUAL SIZE AND DESIGN. BE
SURE TO USE THE PROPER SIZE AND SHAPE SPECIFIED IN THE INSTRUCTIONS.
-TO ASSEMBLE THIS UNIT YOU MAY BE REQUIRED TO PLACE THE UNIT ON IT’S SIDE AND FACE. IT IS
STRONGLY RECOMMENDED THAT ASSEMBLY IS DONE ON A SOFT, NON-ABRASIVE SURFACE TO AVOID
DAMAGING THE FINISH.
NOTES ON CARE AND MAINTENANCE:
-
DO NOT
SCRATCH OR CHIP THE FINISH.
-
DO NOT
STORE THE PRODUCT OR ANY PARTS IN EXTREME TEMPERATURES AND CONDITIONS SUCH
AS A HOT ATTIC OR A DAMP, COLD BASEMENT. THESE EXTREMES CAN CAUSE A LOSS OF STRUCTURAL
INTEGRITY.
-AN OCCASIONAL WAXING, PLUS REGULAR CLEANING WITH MILD SOAP ON A SOFT CLOTH,
FOLLOWED BY A CLEAN DAMP CLOTH, THEN A DRY CLOTH, WILL PRESERVE THE ORIGINAL LUSTER
AND BEAUTY OF THIS FINE FINISH.
DO NOT
SPRAY CLEANERS DIRECTLY ONTO FURNITURE, SPRAY
ONTO CLEANING CLOTH AND THEN APPLY TO FURNITURE. TEST IN AN INCONSPICUOUS AREA
BEFORE APPLYING TO ENTIRE UNIT.
DO NOT
USE ABRASIVE CHEMICALS.
-LIFT SLIGHTLY WHEN MOVING ON CARPETING TO PREVENT LEG BREAKAGE.
-USE OF A VAPORIZER NEAR FURNITURE WILL CAUSE WOOD TO SWELL AND FINISH TO PEEL.
2
WARNING
-PERIODICALLY CHECK TO ENSURE THAT ALL BOLTS AND SCREWS ARE TIGHT TO MAINTAIN
THE STABILITY OF THE UNIT CONTACT DELTA CHILDREN’S PRODUCTS FOR REPLACEMENT
PARTS OR QUESTIONS.
-DO NOT OVERLOAD DRAWERS, PLACE HEAVIEST ITEMS IN THE BOTTOM DRAWERS
-DO NOT ALLOW ANY CHILD TO CLIMB, PLAY ON, OR HANG FROM ANY PIECE OF FURNITURE.
PARTS:
BOLTS AND SCREWS ARE SHOWN FULL SIZE.
A. DRAWER FRONT - LEFT DRAWER (x3)
B. DRAWER FRONT - RIGHT DRAWER (x3)
C. LEFT DRAWER SIDE (x6)
D. RIGHT DRAWER SIDE (x6)
F. DRAWER BOTTOM (x6)
E. DRAWER
BACK (x6)
G. DRAWER SUPPORT (x6)
H. KNOB (x6)
J. DRAWER ASSEMBLY SCREW (x54)
K. KNOB SCREW (x6)
