background image

Trigno Spring Contact Adapter User’s Guide

6

Device contains a Lithium-Polymer battery. Do not damage, 

crush, burn, freeze, heat or otherwise mishandle the device. Re-

charge only with the approved power supply and recharger.  Sen-

sors should be charged at least once every 3 months to prevent 

battery damage from excessive self discharge.  Extended periods 

in the discharged state may damage the internal lithium polymer 

cell.

Trigno Systems should be stored and operated between 5 and 40 

degrees Celsius due to the presence of an internal Lithium Poly-

mer rechargeable cell. Storing or operating the device, and conse-

quently the cell, outside of this temperature range may compro-

mise the integrity and the safety features of the cell.

Device Information

Complies with Requirements put forth by the Medical Device Di-

rective 93/42/EEC. Class I device, Annex VII.

Type BF device (IEC 60601-1).

Isolated device, (Class II, IEC 60601-1)

Do not dispose this product with house waste. Contact Delsys 

Inc. for instructions on responsibly disposing this device. This 

product should not be mixed with other commercial wastes.

Date of Manufacturing (appears on device)

Serial Number (appears on device)

EMERGO EUROPE 

Prinsessegracht 20 

2514 AP The Hague

The Netherlands

Authorized Representative

Manufacturer

DELSYS INC.

23 Strathmore Rd.

Natick MA 01760

USA

Summary of Contents for TRIGNO



















Reviews: