Trigno Avanti Load Cell
Adapter User’s Guide
9
located on the Base Station charging cradle. The internal magnetic switch will
only react when the sensors are undocked from the charger or when the
software is performing an RF pairing operation. Exposure to any magnetic fields
outside of these 2 qualifying conditions will be ignored by the sensor. The
internal magnetic switch is a feature which removes the need for a mechanical
button and improves sensor durability and performance. Common household
magnets can be used to perform these functions as well.
Sensor LED Feedback States
Trigno Avanti sensors indicate their status through various LED Arrow colors
and blink patterns as indicated in the table below. Each of these states is
described in subsequent sections of this User Guide.
State
Color
Pattern
Arrow Display
Common States
1
Power Off
Off
none
2
Power On/Activate
White/Green
fade
/
3
Charging
Amber
solid
4
Charge Complete
Green
solid
5
Identification Mode
White
rapid flash
/
/
6
Scan (Startup)
Amber/Cyan
slow flash
/
7
Power Up Error
Red
slow flash
/
Trigno RF Mode
8
Scan (Base)
Amber/Green Slow flash
/
9
Low Power Scan (Base)
Amber
Occasional Flash
/
10 Data Collection (Base)
Green
slow flash
/
11 Configuration Change (Base) Green
rapid flash (3x)
/
/
12 Pairing (Base)
Amber
solid
13 Pairing Success (Base)
Green
rapid flash (≥6x)
/
/
/
/
14 Pairing Fail (Base)
Red
double flash(≥3x)
/
/
BLE Mode
15 Advertise (BLE)
Cyan
Slow flash
/
16 Low Power Advertise (BLE)
Cyan
occasional flash
/
17 Data Collection (BLE)
Blue
slow flash
18 Idle (BLE)
Magenta
slow flash
Table 1: Sensor LED functions.
