69
Notes
:
• Mac and Linux users should always select one of the Mass Storage options for the USB
setting (depending on if you are saving data on internal or removable memory).
• If you want to access the files on your SD card and you do not have an SD card reader, select
Mass Storage: SD/MMC Card
as the USB setting.
• Select
DeLorme
if you are using the device with compatible DeLorme mapping software.
3. Press QUIT to return to the Device Setup Page.
To Modify the Sound Settings
Use the following instructions to modify the device’s button press sound, message sound, power
sound, turn alert sound, and/or the volume of all sounds.
1. From the Device Setup Page, highlight the
Sound
option and press ENTER.
2. To modify the button press sound, highlight the
Button Press
drop-down list and press
ENTER. Highlight the sound type you want and press ENTER.
3. To modify the message sound, highlight the
Message
drop-down list and press ENTER. Then,
highlight the sound type you want and press ENTER.
4. To modify the Power sound, highlight the
Power
drop-down list and press ENTER. Then,
highlight the sound type you want and press ENTER.
5. To modify the turn alert sound, highlight the
Turn Alert
drop-down list and press ENTER.
Then, highlight the sound type you want and press ENTER.
6. To modify the volume of all sounds, highlight the
Volume
slider control and press the arrow
keypad to the right to increase the volume (or to the left to decrease the volume).
7. To mute the sound, highlight the
Mute
field and press ENTER.
Note
: This does not mute
the warning sound when power is critically low. To enable sound again when the check box is
selected, highlight the
Mute
field and press ENTER to clear the check box.
8. Press QUIT to return to the Device Setup Page.
The Device Setup Page
Sound menu options
