5
use
en
SHORT CORD INSTRuCTIONS
• a short power cord is provided to reduce risks resulting
from becoming entangled in or tripping over a longer
cord.
• Longer, detachable power supply cords or extension cords
are available and may be used if care is exercised in their
use.
• If an extension cord is used, the marked electrical
rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3-
wire, grounding type cord, the extension should be a
GROUNDING TYPE 3 - WIRE CORD. The longer cord should
be arranged so that it will not drape over the counter-
top or table top where it can be pulled on by children or
tripped over.
uSE
Before use
• Remove all packaging from the kettle and power base.
• Remove any labels from the outer stainless steel surfaces.
• Remove the filter (fig. 1) and wash with water (fig. 2).
a
c
b
1
2
a
c
b
1
2
Refer to page 5 “Removing the filter”.
• Fill the kettle and boil.
• The boiled water should be discarded and the kettle rinsed
out with cold water.
This procedure should be carried out three times, to
remove any manufacturing dust, etc.
• After the kettle has been rinsed out, re-fit the filter (fig.
3).
a
c
b
1
2
Power base with 360° access
With the specially designed power base and central connector,
you can now set the kettle on the base at any angle, from any
position.
• Release cord from storage base and adjust length by
winding around the base to give the correct cord length
to reach the plug socket to be used (fig. 4).
a
c
b
1
2
• Do not leave loose cord hanging over the edge of work
surfaces.
Filling
• Remove the kettle from the base unit before filling.
• Open lid and fill kettle to desired level.
Do not fill with less than 10,14 fl.oz. (0,3 litre) of
water
to prevent the kettle running dry while operating;
misuse of this kind will shorten the life of the element.
Do not fill with more than 57,48 fl.oz. (1,7 litres) of
water
(up to the MAX level).
If the kettle is overfilled,
there is a risk that boiling water may be ejected
causing burns.
Switching on
• Plug the power base into the mains socket.
• Place kettle on power base.
• Press the ON/OFF switch down (fig. 5) to switch the kettle
on.
• The pilot light will switch on.
• The kettle will automatically switch off once the water
is boiled (the ON/OFF switch will click upwards and the
lights will switch off ).
a
c
b
1
2
• To turn the kettle off before the water boils, you may move
3
5
4
1
2
Summary of Contents for KBO1401
Page 1: ...1771045IDL 12 12 www delonghi com...
Page 3: ...2...
