DèLonghi DEF909IND, Nstallation And Service Instructions

Page: 12 / 52

12
CONNECTION OF THE POWER SUPPLY CABLE
Important! This cooker must be connected to the electricity supply only by an au-
thorised person.
Unhook the terminal board cover by inserting a screwdriver into the two hooks “ A ~%
13).
Unscrew the screw “ D ” and open completely the cable clamp “ E ”%7`+7*+7[&
Position the U-bolts “ F ” onto terminal board “ G ” % 7` + 7*+ 7[&
7X
Connect the phase, neutral and earth wires to terminal board “ G ” according to the
7X
Strain the feeder cable and block it with cable clamp “ E ” (by screwing screw “ D ”).
Close the terminal block cover (check the two hooks “ A ” are correctly hooked).
'*+%/<=/>/ +=+/ $
the cover plate behind the terminal block.
VOLTAGE AND POWER CONSUMPTION:
VV8+V`8^B8+`7*‰^zŠ*8[8‹#78`*89%&
FEEDER CABLE SECTION
This cooker must be connected to elec-
trical supply using V105 insulated cable.
220-240 V ac 3 x 4 mm
2
(**)
^B8+`7*‰^z *@V<* 2 (**)
^B8+`7*‰Vz `@` 2 (**)
(**) Connection with wall box connection.
– Diversity factor applied.
– A diversity factor may be applied to the
total loading of the appliance only by a
A
Figure 13