Using the iron
(if provided)
To operate the boiler, see the above instructions.
Setting up the ironing system
To connect the iron to the appliance:
Plug the iron into the socket and press until the release
button clicks.
Make sure the plug is fully inserted by attempting to
remove it without using the release button.
To turn on the appliance, follow the above instructions.
When the iron is started up for the first time, you are
recommended to discharge the steam onto a cloth for a
moment in order to eliminate possible impurities
deposited in the iron. Do this by pressing the "steam
required" button on top of the iron.
N.B.: When used for the first time, the appliance may
give out smoke and an odour for several minutes.
This is caused by heating and subsequent drying of
the sealers used in assembling the boiler. You are re-
commended to ventilate the room.
OPERATION
Select the required temperature by rotating the
thermostat knob to one of the marked sectors according
to the type of fabric to be ironed. Wait until the "iron at
temperature" indicator light goes out before beginning to
iron.
N.B.: the indicator light goes on and off during iro-
ning according to the temperature of the iron.
To discharge steam, use the steam button on the iron.
Use the steam flow regulator (1) to obtain the required
quantity of steam.
N.B. When turning the iron on, you are recommen-
ded to rotate the knob into the maximum steam di-
scharge position.
IMPORTANT: the tube connecting the iron to the boi-
ler may become hot.
The iron can also generate steam
in a
vertical position,
enabling fabrics to be easily re-
stored by steaming.
Dry ironing
Turn on the main switch (2) only and leave the steam
generator switch (3) on the appliance control unit in the
off position.
Wait for the indicator light on the iron to go off before
starting to iron.
required quantity of steam.
19
Summary of Contents for Pressurized steam cleaner
Page 1: ...5793106200 03 05 ...
