DeLonghi Pressurized steam cleaner, Instructions For Use Manual

Page: 22 / 22

Acetate - Acrylic - Nylon
•
DRY IRON, VERY LIGHTLY
Polyester - Rayon
•
DRY IRON ON REVERSE SIDE OF GARMENT
AT MINIMUM TEMPERATURE
Silk
••
DRY IRON ON REVERSE SIDE OF GARMENT
Wool - Fine Cotton - Fine Linen
••
STEAM IRON ON REVERSE SIDE OF GARMENT
PLACING A THIN CLOTH OVER THE FABRIC
Cotton - Fine Linen - Starched Articles
•••
STEAM IRON ON FRONT OF WHITE OR LIGHT
COLOURED GARMENTS, ON REVERSE SIDE
OF DARKER ARTICLES
Linen
•••
STEAM IRON WITH PLENTY OF STEAM ON
REVERSE SIDE OF DARK GARMENTS.
Perfect ironing table
21
A) If your appliance comes fitted with a plug, it will incorpora-
te a 13 Amp fuse. If it does not fit your socket, the plug
should be cut off from the mains lead, and an appropriate
plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after
removing the fuse: do not insert in a 13 Amp socket el-
sewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the cir-
cuit must be protected by a 15 Amp fuse.
If the plug is a moulded-on type, the fuse cover must be
re-fitted when changing the fuse using a 13 Amp Asta
approved fuse to BS 1362. In the event of losing the fuse
cover, the plug must NOT be used until a replacement
fuse cover can be obtained from your nearest electrical
dealer. The colour of the correct replacement fuse cover
is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow
the instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol
or coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked
with the letter L or coloured red.
N
E
L
ELECTRICAL CONNECTION (UK ONLY)