6
• If you have a casement window (figure 4) follow steps 2 &
3 and place the window outlet
B3
outside the window to
exhaust the hot air.
• If the windows are large, use the additional window bracket
B5
(if provided) to cover your window aperture, extending it
to the required length, then blocking it with the locking pins
supplied (see figure 5). Make sure you do not cover the hole
for the window outlet.
For help with installation, operation, and for all
accessories and spare/replacement parts, please contact
our toll free customer service call center at:
1-800-322-3848
[US only]
1-888-335-6644
[Canada only]
01-800-711-8805
(Mexico only]
or log onto our website at
www.delonghi.com
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be installed semi-perma-
nently (Fig. 6).
min. 11,8 in
min. 30cm
min. 11,8 in
min. 30cm
Proceed as follows:
• Drill a hole ø 5,25 inches (134 mm) in an outside wall or
through a window pane. Respect the dimensions and
height of the hole given in figure 7 and 8.
134
Ø 5,25 in
.
• Fit the wall flange
B1
into the hole.
• Fit the air exhaust hose
B2
in the relevant housing located
on the rear side of the appliance. (fig. 1).
• Fit the end of the hose
B2
to the wall flange
B1
as shown in
fig. 8.
• When the hose
B2
is not connected, the drilled hole can be
closed with the flange cap
B1
.
3
4
6
7
in the
window
panel
in the wooden
kickboard
of a French
window
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.
1
3
2
5
