HEATING MODE
This is ideal in spring and autumn when outdoor temperatures
are not particularly severe.
For this mode, the appliance should be prepared in the same
way as for air conditioning, with the air exhaust hose attached to
enable the moisture to be discharged outside.
To set this function correctly:
• Press the MODE button a
number of times until the
°F
heating symbol
appears
(fig. 14).
14
• Select the required fan
speed by pressing the
button (B5).
High speed:
to achieve the target temperature as rapidly
as possible
Medium speed:
reduces noise levels but still maintains a
good level of comfort
Low speed:
for silent operation
With particular room conditions (e.g. low temperature or high
temperature), the appliance will automatically select the opera-
ting fan speed however, If the unit is cold, it will automatically per-
form a pre-heating cycle. It can take several minutes and fan will
not operate until pre-heating cycle is over. In this mode, the fan
may operate for short periods, even though the set temperature
has already been reached.
FAN MODE
When using the appliance in this mode, the air exhaust hose
does not need to be attached.
To set this function correctly:
•
Press the
MODE
button (B2) a number of times until the fan
symbol
appears.
•
Select the required fan speed by pressing the
button
(B5).
°F
°F
15
16
High speed:
for maximum fan power (fig. 15);
Medium speed:
reduces
noise levels but still maintains a
good level of comfort (fig. 16);
To change the unit of measurement for the displayed temperature,
press the
and
buttons together for 3 seconds.
SETTING THE TIMER
The timer can be used to delay when the appliance comes on or
goes off. This avoids wasting electricity by optimising operating
periods.
How to programme delayed start up
• Plug the appliance into an
electrical receptacle. It will
be in STAND-BY.
• Press the timer button (B4).
The timer symbol (B16)
18
comes on (fig. 18).
•
Use the (
B6
) or
(B3
) buttons to set the number
of hours delay before the appliance comes on. They increase
or decrease the time in steps of an hour.
The appliance can be set to come on within the next 24 hours.
Five seconds after the timer has been set, the display dims and
the setting is memorised.
After setting, the operating mode and fan speed can be modified.
To cancel the timer programme, press the timer button (
B4
)
again. Pressing the ON/OFF button (
B1
) cancels the timer pro-
gramme and the air conditioner comes on immediately in the
selected mode.
How to programme delay OFF
• Delay OFF can be pro-
grammed in any operating
mode - air conditioning/fan/
°F
dehumidifying.
• Press the timer button (B4).
19
The timer on symbol (B16)
comes on (fig. 19).
•
Use the
(
B6
) or
(B3
) buttons to set the number
of hours delay before the appliance goes off.
They increase or decrease the time in steps of an hour.
The appliance can be set to go off within the next 24 hours.
Five seconds after the timer has been set, the operating mode is
displayed and the timer symbol remains on.
At the set time, the air conditioner goes off and remains in
stand-by.
To cancel the timer programme, press the timer button (
B4
)
again. The timer symbol goes off.
After setting, the operating mode and fan speed can be modified.
°F
Low speed:
for silent
operation (fig. 17).
17
9
