10
• Select the mill you want to adjust (
or
);
• Follow the previous instructions in the tutorial to se-
lect the required grinding fineness by pressing directly
on one of the selectable numbers in the highlighted
interval;
4. Press "OK": "The result in the cup will be perceived after
about 5 deliveries";
5. To implement the adjustment, press OK and deliver 5 cof-
fee beverages using the mill selected at point 3.
6.
Please note!
• After carrying out the above procedure, we recommend
delivering at least 5 coffees before adjusting again. If cof-
fee delivery is still not correct, repeat the procedure.
• You cannot adjust more than one grinding level at a time
unless at least two coffee-based beverages have been
made using the coffee mill selected in point 3.
• To reset the mill to the default values (shown with a star),
press "Default" and deliver 5 coffee beverages.
6.5 Water filter
For instructions on the filter (C6), see section “20. Water softener
filter”.
6.6 Water hardness
For instructions on setting water hardness, see section “19. Set-
ting water hardness”.
6.7 General
1. Press the settings menu (B6);
2. Select "GENERAL";
Here you can enable or disable the following functions with a
simple touch:
- "Beep": when enabled, the appliance beeps whenever an
operation is performed.
- "Cup lighting": This function enables or disables the cup
lights under the coffee spouts (A17).
- "Energy saving": use this function to enable or disable en-
ergy saving. When enabled, the function reduces energy
consumption in compliance with European regulations.
When enabled, the symbol appears on the icon in the
settings menu (B6).
6.8 Auto-off
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press the settings menu (B6);
2. Select "Auto-Off";
3. Select the desired time interval (15 or 30 minutes, or 1, 2
or 3 hours).
4. Press "
←
" to save the new selection and go back to the
homepage.
6.9 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a mobile device. Proceed as follows:
1. Press the settings menu (B6);
2. Select "Bluetooth";
3. "Download the COFFEE LINK app. For greater security en-
able PIN protection and modify PIN from app": enable or
disable the PIN by pressing the cursor corresponding to
"PIN protection".
4. Press "
←
" to save the new selection and go back to the
homepage.
The preset PIN is "0000". You are recommended to customise the
PIN directly from the App.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identified unambiguously when an
association is created between the coffee machine and the App.
6.10 Selecting the language
To modify the language of the display, proceed as follows:
1. Press the settings menu (B6);
2. Select "Select language";
3. Press the flag corresponding to the language you want
to set (press "Next" or "Back" to display all the languages
available). The display is immediately updated with the
selected language.
4. Press "
←
" to save the new selection and go back to the
homepage.
6.11 Emptying the circuit
To avoid the water in the circuit freezing if the appliance is to be
left idle for a long period of time, or before taking it to customer
services, we recommend emptying the water circuit.
Proceed as follows:
1. Press the settings menu (B6);
2. Select "Empty water circuit";
3. "Press OK to start water circuit emptying": press "OK";
4. "Empty grounds container and drip tray": after completing
the operation requested, press "Next";
5. "Position 0.5l container under spouts. Press OK to start":
after completing the operation requested, press "OK";
6. "Rinsing underway. Hot water from spouts": the appliance
performs a rinse cycle from the coffee spouts (A17);
7. "Empty water tank": when the tank is completely empty,
press "Next";
8. "Remove water filter": when you have removed the filter,
press "Next";