6
MODELS WITH REMOTE CONTROL
Some models are equipped with a remote control to provide ease of operation.
The appliance can be completely controlled with the remote control.
Two AAA 1,5V batteries are required (not included):
• remove the cover located on the back side of the remote control;
• insert the two AAA 1,5V batteries positioning them correctly (see the instructions in the
batteries compartment);
• replace the cover.
REMOTE CONTROL OPERATION
-
When you press the “ON power selection” push button, the appliace operates at the max-
imum power. Each further pression of the “power selection” push button, the power will
change from MAX to MED/MIN/MAX.
-
If you desire to operate with the fan only, press the “Fan Only” pushbutton.
-
Only when a function is selected it is possible to activate the rotation of the appliance, by
pushing the “ON/OFF oscillating base” push button.
-
The “Off” push button switches off the appliance.
Every time you press a button, the appliance will confirm the selection with a “beep” and the
pilot light on the remote control will illuminate.
IMPORTANT
In the event of a blackout , the appliance settings will be reset.
To turn the appliance back on, repeat the procedure described above.
MAINTENANCE
- Always remove the plug out of its socket point before cleaning the heater.
-
Periodically clean the air intake and outlet grilles.
- Do not use abrasive cleaning products or solvents.
Fig. 5
ON power selection
pushbutton
Fan Only pushbutton
ON/OFF oscillating base
pushbutton
Off
Pilot light
01_HMH 550R_GB.qxd 6-08-2003 14:01 Pagina 6
