4
ELECTRICAL CONNECTION
-
Before using the appliance check that your supply voltage is the same of that shown on
the rating label of the unit.
-
THIS APPLIANCE CONFORMS TO DIRECTIVE 89/336/CEE GOVERNING RADIO
INTERFERENCE.
INSTALLATION
The heater can be used on a horizontal surface.
Models with a motorised base can be wall-mounted, using 3 screws and 3 wall plugs.
To wall-mount, proceed as follows:
Drill holes in the wall, as shown in Fig.1, paying particular attention to the minimum distances
indicated.
When the appliance is used in bathroom, remember to position it outside the areas in which
the presence of water may represent a source of danger (fig.3).
The appliance must not be positioned directly underneath a fixed power
point.
FUNCTIONING AND USE
FAN HEATER CONTROLS:
The thermostat will adjust the set temperature automatically and keep
it constant.
OPERATION AND USE
By pressing the “
ON/OFF
” button (Fig. 4) one or more times (a beep will confirm each selec-
tion), the appliance will select the operating heating power, as follow:
P max (maximum power)
P med (medium power)
GB
thermostat dial
Fig. 4
These two LEDs indicate the
selected power level
As the appliance cycles
between the different power
levels when it is in use, these
two LEDs indicate the level
currently in use
ON/OFF button
ventilation only
01_HMH 550R_GB.qxd 6-08-2003 14:01 Pagina 4
