5
P min (minimum power)
Fan only (summer operation)
off
If “P max” maximum appliance operating power has been selected, adjust the thermostat dial
(Fig. 4) to the desired comfort temperature, from * (5°C) and max (35°C).
If the selected temperature is higher than the actual room temperature, the appliance will start
automatically and rapidly heating the room until it reaches the selected temperature. The unit will
automatically mantain the temperature at a constant level, by cycling between “max”, “med” and
“min”, as it approaches the selected comfort temperature.
If the room temperature exceeds the selected temperature level, the appliance will turn itself
off.
The appliance will turn on automatically again when the room temperature falls below the
selected temperature level.
If a power level below “P max” has been selected using the “
ON/OFF
” button, the appli-
ance will modulate between the selected level and the lower power levels.
ANTIFREEZE FUNCTION
Press the “
ON/OFF
” button to select the “P max” power level.
Set the thermostat dial to the “
*
” position (Fig. 4).
When set in this way, the appliance will turn on automatically only if the room temperature
falls below 5°C, to prevent it from freezing at minimum energy consumption.
This function is not guaranteed in the event of black outs, even if lasting just a few seconds.
MODELS WITH ROTATING BODY
This appliance is fitted with a motorized base and a rotating body.
To distribute the air flow over a larger area, push the foot switch (Fig. 5).
When activated, the appliance will oscillate from right to left over an angle.
To stop the appliance in the desired position, simply push the foot switch again (a beep will
confirm the selection)
MAX
MAX
MAX
MED
MAX
MIN
MAX
OFF
Selected power
Power used
01_HMH 550R_GB.qxd 6-08-2003 14:01 Pagina 5
