9
4.3 Changing the battery of the remote control
•
Remove the battery holder on the back of the remote con-
trol (fig. 21);
18
•
Wash thoroughly the cooling pad with water; then leave it
to completely dry and reassemble the filtersin its
housing (fig. 19).
21
•
Insert one 3V CR2025 type lithium battery on the support,
checking that the polarity is correct (+ and -) (fig. 22).
19
•
To maintain the efficiency of the appliance, it is suggested
to change the cooling pad every year.
4.2 Cleaning the water tank
Please note:
Turn off unit and let sit two minutes before removing drawer to
allow excess water to drain back into tank
•
Remove the water tank (fig. 4);
•
Clean thoroughly with a cleaning sanitizer, easily available
in stores (fig. 20).
20
22
Please note:
•
If you change or dispose the remote control, the bat-
tery must be removed and disposed of according to local
recycling regulations.
•
Never throw the battery in fire as it may explode or leak
dangerous liquids.
•
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reaso-
nable protection against harmful interference in a residen-
tial installation.
•
This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or te-
levision reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
