DeLonghi ESAM5400, Instructions For Use Manual

Page: 19 / 24

19
EXPlANATION OF lIGHTS
lIGHT POSSIBlE CAUSE REMEDY
insufficient water in the tank. Fill the tank with water and insert it correctly,
pushing it as far as it will go until it clicks
into place.
FlaSh
altenating to
FlaSheS
The grinding is too fine and the coffee is deli-
vered too slowly
repeat coffee delivery and turn the grinding
adjustment knob (fig. 10) one click clockwise
towards “7” while the coffee mill is in opera-
tion. if after making at least 2 coffees delivery
is still too slow, repeat the correction proce-
dure, turning the grinding adjustment knob
another click until delivery is correct
FlaSheS
The grounds container is too full or more
than 3 days have passed since you last made
coffee (this guarantees correct hygiene of the
machine).
empty the grounds container and clean, then
replace. important: when removing the drip
tray, the grounds container must be emptied,
even if it contains few grounds. if this is not
done, when you make the next coffees, the
grounds container may fill up more than
expected and clog the machine.
after cleaning, the grounds container has not
been replaced.
open the service door, remove the drip tray
and insert the grounds container.
FlaSheS
The “pre-ground coffee” function has been
selected without placing any pre-ground
coffee in the funnel.
Place pre-ground coffee in the funnel or
deselect the “pre-ground” function.
FlaSheS
The machine must be descaled. The descaling procedure described in the
“descaling” section needs to be performed as
soon as possible.
FlaSheS
Too much coffee has been used. Select a milder taste or reduce the quantity of
pre-ground coffee.
FlaSheS
The coffee beans have run out. Fill the beans container
The pre-ground coffee funnel is clogged. empty the funnel with the help of a brush as
described in the section “Cleaning the pre-
ground coffee funnel”.
FlaSheS
The infuser has not been replaced after
cleaning.
insert the infuser as described in the
paragraph “Cleaning the infuser”.
The service door is open Close the service door.
The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,
as described in the section “Cleaning and
maintenance”. if the message is still displayed
after cleaning, contact a Customer Service.
ECO
The function is active and reduces electricity
consumption.
disable the function in the menu.