DeLonghi ESAM5400, Instructions For Use Manual

Page: 10 / 24

10
5. Press the button (fig. 4). after a few
seconds, the appliance delivers hot water and
the
light comes on.
The appliance ends the first start up procedure
and goes off.
The coffee maker is now ready for normal use.
Please note:
• When using the appliance for the first time,
you need to make 4/5 cups of coffee and 4/5
cappuccinos before the appliance starts to
give satisfactory results.
TURNING THE APPlIANCE ON
Please note:
Before turning the appliance on, make sure the
main switch on the back of the appliance is in the
I position (fig. 3).
each time the appliance is turned on, it performs
an automatic preheat and rinse cycle which can-
not be interrupted.
The appliance is ready for use only after comple-
tion of this cycle.
Danger of burns!
during rinsing, a little hot water comes out of
the coffee spouts and is collected in the drip tray
underneath.
avoid contact with splashes of water.
• To turn the appliance on, press the but-
ton (fig. 5): The light flashes while the
appliance is heating up and performing an
automatic rinse cycle. By circulating hot wa-
ter, the appliance heats both the boiler and
the internal circuits
.
The appliance is at temperature when the
light goes off and the lights corresponding to the
selected coffee taste and quantity come on.
TURNING THE APPlIANCE OFF
each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be inter-
rupted.
Important!
To avoid damaging the appliance,always press
the button to switch off the appliance.
Danger of burns!
during rinsing, a little hot water flows from the
coffee spouts. avoid contact with splashes of
water.
To turn the appliance off, press the
button
(fig. 5). The appliance performs a rinse cycle,
then goes off.
Please note:
if the appliance is not used for an extended pe-
riod, place the main switch in the 0 position (fig.
6).
never place the main switch in the 0 position
while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing
the P button; the following menu settings are available:
rinse, decalcificazione, descale, auto-off, Set tempe-
rature, Water hardness, Statistics, default values.
Rinse
For instructions on rinsing, see “Tips for a hotter
coffee”, page 12.
Descaling
For instructions on descaling, see page 16.
Energy saving
use this function to enable or disable energy sa-
ving mode. This mode is active by default (eCo
light on), reducing energy consumption while
the machine is on in compliance with current eu-
ropean regulations.
1. Press the P button to enter the menu;
2. Turn the selection knob until the eCo light
comes on.
3. Press the button to activate, or
to deactivate, the energy saving fun-
ction.
4. When activated, press the button to
exit the menu.
Please note!
as the “eCo” function is deactivated, the cup
warming shelf is automatically activated.
Auto off (Stand by)
The appliance is set to turn off automatically if
not used for 2 hours.
The time can be changed so that the appliance
switches off after 15 or 30 minutes, or after 1,