27
PROBLEM
POSSIBLE CAUSE
REMEDY
At the end of descaling, the
appliance requests a third
rinse
During the two rinse cycles, the water tank
(A18) has not been filled to the MAX level.
Follow the instructions displayed by the appli-
ance, but first empty the drip tray (A24) to avoid
the water overflowing.
The milk does not come out of
the milk spout (D5)
The lid (D2) of the milk container lid is dirty
Clean the milk container lid as described in sec-
tion “4.3 Cleaning the milk container”.
The milk contains large
bubbles and squirts out of
the milk spout (D5) or there is
little froth
The milk is not cold enough or is not semi-
skimmed or skimmed
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incorrectly
adjusted.
Adjust following the instructions in section
“8.1 Adjusting the amount of froth”.
The milk container lid (D2) or froth adjustment
dial (D1) is dirty
Clean the milk container lid and froth adjust-
ment dial as described in section “4.3 Cleaning
the milk container”.
The hot water connection nozzle (A15) is dirty Clean the connection nozzle as described in
section “9.1 Cleaning the hot water nozzle”.
The cup warmer is hot, even
though it has been disabled
A number of beverages have been prepared in
succession
The machine emits noises or
small puffs of steam while not
in use
The machine is ready for use, or has recently
been turned off, and condensate is dripping
into the hot vaporiser
This is part of normal operation. To limit the
phenomenon, empty the drip tray.
Summary of Contents for ECAM51X.55 series
Page 1: ...De Longhi Appliances via Seitz 47 31100 Treviso Italy www delonghi com 5713232441_00_ 0217...
Page 4: ...3 A A1 A2 A11 A13 A12 A14 A15 A4 A7 A8 A9 A10 A3 A5 A6 A17 A18 A19 A24 A23 A22 A21 A20 A16...
Page 5: ...4 3B 3A 6 5 1 7 8 9 11 12 13 14 16 16 4 15 2 10 MILK...
Page 6: ...5 8 12 16 17 18 20 23 25 27 28 30 29 31 32 16 P U S H 4 19 24 26A 26B P U S H CLEAN 22 21...
