background image

18

•  For a creamier froth, rotate the container with slow move-

ments in an upward direction. 

•  To avoid milk with poor froth or large bubbles, always clean 

the spout (C6) as described in the following section.

2.2  Clean the hot water/steam spout after use

Always clean the hot water/steam spout (C6) after use to avoid 
the build-up of milk residues and prevent it from clogging.
1.  Place a container under the hot water/steam spout and de-

liver a little water (see section “12. Delivering hot water”). 
Then stop the delivery of hot water by pressing 

 (B5) 

or  

 (B3).

2.  Wait a few minutes for the hot water/steam spout to cool 

down, then extract (fig. 15) by pressing the release button 
(C7). Hold the spout with one hand and with the other, 
turn the cappuccino maker and pull it downwards (fig. 21).

3.  Also remove the steam connection nozzle by pulling it 

downwards (fig. 22).

4.  Check the hole in the connection nozzle is not blocked. If 

necessary, clean using a toothpick.

5.  Wash all parts of the spout thoroughly with a sponge and 

warm water.

6.  Insert the connection nozzle, then the cappuccino maker 

on the nozzle by pushing it upwards and turning it clock-
wise until it is attached.

14.  CLEANING

6.1  Cleaning the machine

The following parts of the machine must be cleaned regularly:
-  the appliance’s internal circuit;
-  coffee grounds container (A20);
-  drip tray (A24), condensate tray (A16) and grille (A23);
-  water tank (A18);
-  coffee spouts (A14);
-  pre-ground coffee funnel (A6);
-  infuser (A9), accessible after opening the infuser door 

(A10);

-  milk container (D);
-  hot water/steam connection nozzle (A15);
-  hot water/steam spout (C6 - see section “2.2 Clean the hot 

water/steam spout after use”)

 Important! 

•  Do not use solvents, abrasive detergents or alcohol to clean 

the coffee machine. With De’Longhi superautomatic coffee 
machines, you need not use chemical products to clean the 
machine.

•   None of the components of the appliance can be washed 

in a dishwasher with the exception of the drip tray grille 
(A23) and milk container (D).

1.  Make sure the hot water/steam spout (C6) is attached 

correctly to the hot water/steam connection nozzle (A15);

2.  Place a container under the water spout (as close as possi-

ble to avoid splashes) (fig. 5);

3.  Press 

 (B4) and scroll the beverages in the menu 

with the selection arrows 

 (B4) or 

 (B5) until 

“Hot water” is displayed between the two dotted lines;

4.  Press 

 (B3): the display shows a progress bar that 

indicates the quantity delivered;

5.  The appliance delivers hot water and then delivery stops 

automatically. To manually stop the delivery of hot water, 
press 

 or  

 (B3).

 Please note:

•  If “Energy Saving” mode is active, you may have to wait a few 

seconds before the hot water is delivered.

•  The quantity of water delivered can be customised (see 

section “16.1 Program beverages”).

13.  STEAM DELIVERY

 Important! Danger of burns. 

Do not leave the appliance unattended while steam is being 
delivered. 

1.  Make sure the hot water/steam spout (C6) is attached 

correctly to the hot water/steam connection nozzle (A15);

2.  Fill a container with the liquid to be heated or frothed and 

immerse the hot water/steam spout in the liquid;

3. Press 

 (B4) and scroll the beverages in the menu by 

pressing the selection arrows 

  or 

 (B5) until 

“Steam” is displayed between the two dotted lines;

4. Press 

 (B3): the display shows a progress bar that 

indicates the quantity delivered;

5.  Once having reached the desired temperature or froth 

level, to stop the delivery of steam press 

 or 

 

(B3).

 Important! 

Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.

 Please note!

If “Energy saving” is active, you may have to wait a few seconds 
before steam is delivered.

2.1  Tips for using steam to froth milk

•  When choosing the size of the container, bear in mind that 

the liquid doubles or triples in volume.

•  For a richer denser froth, use skimmed or partially skimmed 

milk at refrigerator temperature (about 5°C). 

Summary of Contents for ECAM51X.55 series






























Reviews: