20
REPLACEMENT OF THE
INJECTORS OF THE BURNERS
Select the injectors to be replaced
according to the “Table for the choice of the
injectors”.
The nozzle diameters, expressed in
hundredths of a millimetre, are marked on
the body of each injector.
If the injectors are not supplied they can
be obtained from the “Service Centre”.
REPLACEMENT OF THE INJECTORS
OF THE COOKTOP BURNERS
To replace the injectors proceed as follows:
•
Remove pan supports and burners
from the cooktop.
•
Using a wrench, substitute the nozzle
injectors “
J
” (figs. 2.5, 2.6, 2.7) with
those most suitable for the kind of gas
for which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
J
Fig. 2.5
Semi-rapid burners
J
Injectors for
outer crown
J
Injector for
inner crown
Dual burner
Fig. 2.7
Triple ring burners
Fig. 2.6
J