DeLonghi DS 61 GW Installation And Service Instructions Manual Download | Manualshive

Page: 23 / 40

background image

23

FAN GRILL

Both the grill and the fan come on. Most of the cooking is done by grilling and then
the hot air circulated around the oven. The oven door should be kept

closed

.

The temperature can be set between 50°C and 175°C maximum.
The oven should be preheated for 5 minutes before cooking. For further cooking hints
see “GRILLING AND AU GRATIN”.

Ideal for:

Quick sealing in of food juices for example such as hamburger, chicken pieces, chops.

It is recommended that you do not grill for longer than 30 minutes at any
one time.
Attention: the oven door becomes very hot during operation.
Keep children away.

MAINTAINING TEMPERATURE AFTER COOKING OR

SLOWLY HEATING FOODS

The upper element, the circular element and the fan come on.
The heat is circulated by forced convection with greater intensity in the upper part.
The temperature can be set to between 50° and 150°C via the thermostat knob.

Recommended for:

Keeping food warm after any type of cooking. Slow heating of cooked food.

MULTI-FUNCTION

The upper and lower heating elements come on and the fan come on - the heat from
the element being circulated by the fan.
The temperature range can be set to between 50° and 250°C using the thermostat.

Idea for:

Large bulky quantities of food that require even cooking throughout for example large
roasts, turkey, roast turkey, cakes etc.

FAN FORCED

The circular element and fan come on. The heat is dispersed by forced convection and
the temperature can be varied to between 50° and 250°C via the thermostat knob.
The oven does not require preheating.

Recommended for:

Food which has to be well-cooked outside and soft or rosy inside, for example lasagne,
lamb, roast beef, whole fish etc.

«
...
21
22
23
24
25
...
»

Summary of Contents for DS 61 GW









































Reviews:

No comments

Related manuals for DS 61 GW

Brand: Everdure Pages: 13

Brand: Nesco Pages: 11

Brand: Gaggenau Pages: 60

Brand: Dash Pages: 32

Freestanding Cooker CSA150X-6

Brand: Smeg Pages: 40

Brand: Whirlpool Pages: 20

Brand: Toshiba Pages: 8

Brand: Parkinson Cowan Pages: 40

Brand: Sencor Pages: 5

Brand: Indesit Pages: 36

Brand: Indesit Pages: 56

Brand: Indesit Pages: 64

Brand: THERMOROSSI Pages: 32

Brand: Eico Pages: 24

Brand: Coleman Pages: 28

Brand: Bush Pages: 20

Brand: Bush Pages: 20

Brand: Aroma Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands