7
Figure 2
ANTI-TILT BRACKET
Warning
:
This appliance must be restrained to prevent accidental tipping by fitting a
bracket to the rear of the appliance and securely fixing it to the wall.
Fixing the anti-tilt bracket:
■
After you have located where the cooker is to be positioned mark, on the wall,
the place where the 2 screws of the anti-tilt bracket have to be fitted. Please fol-
low the indications given in the drawing below.
■
Make two holes of diameter 8mm diameter on the wall and insert the plastic
plugs.
■
Attach the anti-tilt bracket loosely by means of 2 screws.
■
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that
it can engage in one slot of the cooker back.
■
Attach the anti-tilt bracket tight.
■
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in
one slot of the cooker back.
6
3 5
235
6 0 mm
0
m
n
0
i
1
5
xa
14
0
m
0
+ 35
Summary of Contents for DS 61 GW
Page 40: ...cod 1102921 ß1 ...
