manualshive.com logo in svg

DeLonghi DE 302 IB-1, Installation And Service Instructions Use And Care Instructions

Share
Download
DeLonghi DE 302 IB-1 Installation And Service Instructions Use And Care Instructions Download Page 22

22

MAXIMUM USABLE POWER FOR THE COOKING ZONES

The power board manages a maximum total power of 3700 W.

Should the cooking zones require more than 3700 W, the last selected power level has 

priority and the power of the other cooking zone is automatically reduced to the remaining 

power available.

If this occurs, the cooking zone will display a flashing figure for about 3 seconds before 

automatically displaying the new power level.

This means for example that:

 

■

When setting a “Booster” programme for the second zone, the setting for the other 

zone could be reduced to the remaining power available.

 

■

When  setting  a  “Booster”  programme  for  a  zone  and  then  another  setting  on  the 

second zone, if the total power exceed 3700 W the “Booster” programme is deleted 

and the power reduced to the maximum power available.

THERMAL PROTECTIONS

The induction hob is fitted with safety devices to protect the electronic system and to protect 

each cooking zone from overheating.

In case of overheating, one of the following automatic functions could be started by the 

electronic system:

 

■

“Booster” program deleted and power reduced.

 

■

One or more cooking zone switched Off.

 

■

Cooling fan motor of the induction unit switched On.

Summary of Contents for DE 302 IB-1





























Reviews:

No comments

Brands by name

Popular brands

Load more brands