17
BOOSTER FUNCTION
This function allows the cooking zone to operate at the “Booster” maximum power (above
the nominal power) for maximum 5 minutes; it could be used, for example, to rapidly heat
up large amount of water.
–
The “Booster” function is always limited to a maximum of 5 minutes.
To activate the “Booster” function:
■
Set the power level “
9
” on the selected cooking zone, then just touch the key
until
the relevant display shows “
P
” (fig. 17).
■
At the end of the “Booster” program (5 minutes) the cooking zone is automatically set
to the power level “
9
”.
■
Note: if a cooking zone is still hot, it is not possible to use the “Booster” function
and “
P
” will flash if you try to activate. The cooking zone is automatically set to the
maximum power level (“
9
”).
To deactivate the “Booster” function:
■
Set a different power level on the selected cooking zone.
or
■
Switch Off the cooktop.
IMPORTANT NOTES:
■
The “Booster” function is not suitable for use with non water based cooking.
■
Do not use this function for heating oil (e.g. deep fat frying).
Figure 17
Summary of Contents for DE 302 IB-1
Page 27: ...27 ...
