38
EN
3. POSITIONING AND INSTALLING
This appliance is designed and made to heat do-
mestic rooms or similar and to dry towels.
WARNING:
This appliance is designed to dry towels washed in
water only. It must not be used for other purposes.
The appliance must be used permanently moun-
ted on a wall as described in the instructions. Ins-
tall the appliance with the control device at the
bottom right and the control buttons towards the
front as in Fig. 3.
Do not install the appliance with the fan facing
upwards
In bathrooms (with bath or shower), install the ap-
pliance outside zone 1 (Fig. 3).
The appliance must be installed in such a way that
the switch, electronic controls and other control
devices cannot be touched by someone in the
bath or shower (Fig. 3). The electronic controls and
2. GENERAL INFORMATION
Storage and maintenance:
Avoid storing the appliance in places at risk of freezing.
Protect from frost.
Unpack the appliance carefully and rest it on the polys-
tyrene corner pieces or a soft support to avoid damage.
The package contains:
– the appliance
– remote control with two batteries and container for
wall mouting
– mounting kit
– instructions
Read all the instructions carefully before installation
and use. Keep for future consultation.
Install and use the appliance as described in these
instructions only.
These instructions do not cover all situations which
might arise. Caution and common sense should be
applied when installing, operating and servicing
the appliance.
A Brand/Manufacturer
B Model, type, category
C Voltage and Power
D Double
isolation
E Country of origin
F EC
Mark
G Serial
Number
H Product
Code
The technical speci
fi
cations of the appliance are indicated on the rating plate on the bottom right of the radiator (Fig. 1).
1. SPECIFICATIONS OF THE APPLIANCE
Voltage: 230 V ~ 50 Hz
Insulation class: II
Protection class: IP24
Total power
[W]
Towel warmer
power [W]
Fan power
[W]
Model with symmetrical
flat tube
Model with tube
Model with asymmetrical
flat tube
Size
[ l x h mm ]
A ( I )
mm
B ( h )
mm
Size
[ l x h mm ]
A ( I )
mm
B ( h )
mm
Size
[ l x h mm ]
A ( I )
mm
B ( h )
mm
1500
500
1000
550x1190
410
974
550x855
410
608
600x1203
410
985
1700
700
1000
550x1420
410
1205
550x1265
410
974
600x1528
410
1310
2000
1000
1000
550x1730
410
1513
550x1800
410
1469
600x1852
410
1635
Table 1
Make sure the appliance is complete and unda-
maged. If damaged, do not use the appliance, but
contact your local dealer or a quali
fi
ed professional.
The materials used for packaging can be recycled.
You are therefore recommended to dispose of them
in special differentiated waste collection containers.
I Protection
class
L Quality
marks
M Disposal
procedures
Modifying the characteristics of the appliance and
removing any
fi
xed component including the caps
and/or removing or rotating the control device in any
way are expressly prohibited (Fig. 2).
