Copyright
2011, Delmhorst Instrument Co.
Page 6 of 17
4. The unit will read %MC on a wood scale between 6% and 60%.
5. To hold a reading on-screen, press the
HOLD (SELECT) KEY
. Press the
HOLD
(SELECT) KEY
again to return to measuring mode.
6. Use the
ò
key to highlight
EXIT
. Then, use the
SELECT
key to return to the
MAIN
MENU
when finished.
NOTE:
The
QuickNav
is calibrated to give %MC readings on Douglas Fir. If you are taking
readings on other species of wood, refer to the species correction table on page 16.
TO TAKE DRYWALL READINGS:
1.
From the Main Menu
, use the
ò
key to highlight
DRYWALL
. Then, use the
SELECT
key to enter the pin mode.
2. The meter will display the
DRYWALL
screen, as shown below:
3. Push the contact pins into the drywall. Any Delmhorst electrode may also be used in
DRYWALL
mode by simply attaching it to the connector on top of the meter.
4. The unit will read %MC on a drywall scale between .1% and 6%.
5. To hold a reading on-screen, press the
HOLD (SELECT) KEY
. Press the
HOLD
(SELECT) KEY
again to return to measuring mode.
6. Use the
ò
key to highlight
EXIT
. Then, use the
SELECT
key to return to the
MAIN
MENU
when finished.
TO TAKE SCAN READINGS:
1.
From the Main Menu
, use the
ñ ò
key to highlight
SCAN
. Then, use the
SELECT
key to enter the
SCAN
mode.
2. The meter will display the
SCAN
screen, as shown below: