Delmhorst QuickNav Owner'S Manual Download Page 15

Copyright 

 2011, Delmhorst Instrument Co.  

Page 15 of 17 

 

WARRANTY 

 

Delmhorst Instrument Co., referred to hereafter as Delmhorst, guarantees the QuickNav  meter for 
one year from date of purchase and any optional electrodes against defects in material or 
workmanship for 90 days. If, within the warranty period of the Model QuickNav, you find any 
defect in material or workmanship, return the meter following the instructions in the “

Service for 

Your Meter”

 section.

 

This warranty does not cover abuse, alteration, misuse, damage during 

shipment, improper service, unauthorized or unreasonable use of the meter or electrodes. This 
warranty does not cover batteries, pin assemblies, or pins.

 

If the meter or any optional electrodes 

have been tampered with, the warranty shall be void.  At our option, we may replace or repair the 
meter. 

 

Delmhorst shall not be liable for incidental or consequential damages for the breach of any 
express or implied warranty with respect to this product or its calibration. With proper care and 
maintenance the meter should stay in calibration; follow  the instructions in the “

Care of Your 

Meter”

 section.  

 
UNDER NO CIRCUMSTANCES SHALL DELMHORST BE LIABLE FOR ANY INCIDENTAL, 
INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES OF ANY TYPE WHATSOEVER, 
INCLUDING, BUT NOT LIMITED TO, LOST PROFITS OR DOWNTIME ARISING  OUT OF OR 
RELATED IN ANY RESPECT TO ITS METERS OR ELECTRODES AND NO OTHER 
WARRANTY, WRITTEN, ORAL OR IMPLIED APPLIES. DELMHORST SHALL IN NO EVENT BE 
LIABLE FOR ANY BREACH OF WARRANTY OR DEFECT IN THIS PRODUCT THAT 
EXCEEDS THE AMOUNT OF PURCHASE OF THIS PRODUCT. 
 
The express warranty set forth above constitutes the entire warranty with respect to Delmhorst 
meters and electrodes and no other warranty, written, oral, or implied applies. This warranty is 
personal to the customer purchasing the product and is not transferable.   

 

 

 

Delmhorst Instrument Co. 

51 Indian Lane East 

Towaco NJ 07082 

 877-DELMHORST   

www.delmhorst.com 

E-mail - 

[email protected] 

 

For 65 years Delmhorst Instrument has been  the leading manufacturer of high quality, US-made 
moisture meters and thermo-hygrometers. Today we offer a wide range of meters for applications 
including water damage restoration, construction, flooring, lumber/woodworking, paper, and 
agriculture.

 

 
 
 
 
 
 
 
 
 
 
 

510INS-0031 

 

REV 06/2011 

 

Summary of Contents for QuickNav


















Reviews: