Back to Contents Page
Palm-Rest Assembly
Dell™ XPS™ L501X Service Manual
Removing the Palm-Rest Assembly
Replacing the Palm-Rest Assembly
Removing the Palm-Rest Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the screw that secures the palm-rest assembly to the base cover.
4.
Release and push the palm-rest assembly tabs off the base cover.
5.
Turn the computer over and open the display as far as possible.
6.
Starting from the top, gently ease the palm-rest assembly from the top cover.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
palm-rest assembly tabs (2)
2
screw
3
base cover
Summary of Contents for XPS L501X
Page 37: ...Back to Contents Page ...
Page 42: ...Back to Contents Page ...
