Dell XPS 730 Service Manual Download Page 101

Page: 101 / 110

System Setup

101

System Time

(hh:mm:ss)

Displays the current time.

System Date

(mm:dd:yy)

Displays thecurrent date.

SATA 1

Displays the SATA 1 drive integrated in the system.

SATA 2

Displays the SATA 2 drive integrated in the system.

SATA 3

Displays the SATA 3 drive integrated in the system.

SATA 4

Displays the SATA 4 drive integrated in the system.

SATA 5

Displays the SATA 5 drive integrated in the system.

SATA 6

Displays the SATA 6 drive integrated in the system.

SATA 7

Displays the SATA 7 drive integrated in the system.

SATA 8

Displays the SATA 8 drive integrated in the system.

IDE Master

Displays the IDE Master installed in the system.

IDE Slave

Displays the IDE Slave installed in the system.

Advanced BIOS Features

Boot up

NumLock Status

Select power-on state for num-lock.

ACPI APIC

support

Include ACPI APIC table pointer to RSDT pointer list.

Boot Configuration Features

1st Boot

Device

Displays the first boot device.

2nd Boot

Device

Displays the second boot device.

Hard Disk

Drives

Sets the hard drive boot priority. The items displayed are

dynamically updated according to the hard drives detected.

CD/DVD Drives

Sets the CD/DVD drive boot priority. The items displayed are

dynamically updated according to the hard drives detected.

Summary of Contents for XPS 730















































































































Search results

Summary of Contents for XPS 730

Reviews:

Brands by name

Popular brands

Dell XPS 730, Service Manual

Search results

Summary of Contents for XPS 730

Reviews:

Brands by name

Popular brands