Colocación del teclado
AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
. After working inside your computer, follow the
instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Align the screw holes on the keyboard with the screw holes on the palm-rest
assembly.
2
Replace the 30 screws (M1.6x1.5) that secure the keyboard to the palm-rest
assembly.
3
Adhere the touchpad cable, the I/O-board cable, and the keyboard-controller
board cable to the keyboard.
4
Slide the keyboard cable and the keyboard-backlight cable into the keyboard-
controller board and close the latches to secure the cables.
Requisitos posteriores
1
Coloque el
.
2
Coloque el
3
Siga el procedimiento del paso 1 al paso 8 en "
".
4
5
Coloque el
.
6
.
7
8
9
10
88
Summary of Contents for XPS 13
Page 1: ...XPS 13 Service Manual Computer Model XPS 9360 Regulatory Model P54G Regulatory Type P54G002 ...
Page 27: ...2 Coloque la cubierta de la base 27 ...
Page 32: ...Requisitos posteriores 1 Coloque la batería 2 Coloque la cubierta de la base 32 ...
Page 90: ...Procedure After performing all the pre requisites we are left with the palm rest assembly 90 ...
