Configuring Connection Settings Locally
35
Use the ICA tab to select the check boxes you want for the options that are available to
all ICA sessions. Select the audio quality optimized for your connection.
Note the following:
Map to
- When a drive is entered, maps a disk under the drive.
Map all disks under
- When selected, you can use the drop-down list to select the
drive under which you want to maps all disks.
Use the RDP tab to:
•
Enable or disable Network Level Authentication (NLA). The NLA authentication
method verifies users before they are allowed to connect with a full Remote
Desktop connection.
•
Enable or disable ForceSpan. This dual-monitor feature allows you to span the
session horizontally across two monitors (two monitors acting as one large
monitor).
•
Enable or disable Terminal Service Multimedia Redirection (TSMM).
•
Enable or disable Record from Local (recording from local microphone).
•
Enable or disable RemoteFX.
•
Select the USB Redirection Type (TCX USB or RDP USB). TCX USB is the default. To
use RDP USB you must use a RemoteFX session (RDP USB is not supported using a
standard RDP session).
