Dell Vostro V130, Service Manual

Page: 64 / 71

System Configuration
Wake On LAN Allows the computer to be remotely
turned on. This feature is enabled only
when the AC adapter is connected.
Default: Enabled
Post Behaviour
Adapter Warnings Enables or disables adapter warnings. Default: Enabled
Fast Boot Allows the System Setup to skip
certain tests during power on self test
(POST) which decreases the amount
of time needed to boot the computer.
Default: Enabled
Keyboard Click Enable or disable the keyboard sound. Default: Disabled
Battery Health
Primary Battery Displays the health of the battery
Security
Service Tag Displays the current service tag of the computer.
Asset Tag Displays the asset tag.
Unlock Setup Status Specifies whether a setup password has been assigned.
Admin Password Status Specifies whether an admin password has been assigned.
Admin Password Allows you to set an admin password.
System Password Status Specifies whether a system password has been assigned.
System Password Allows you to set a system password.
Password on Boot Enable or disable authentication every time your computer
boots.
Password Bypass Allows you to bypass the system and hard drive
passwords when your computer restarts.However, you
must enter the passwords if you are turning the computer
on from the shutdown state.
Password Change Enable or disable the password change feature.
Computrace option Enable or disable the Computrace feature on your
computer.
HDD Security Configuration Allows you to set a password on the computer's internal
hard drive (HDD). The hard drive password is enabled
even when the hard drive is installed on another
computer.
Boot
The Boot tab allows you to change the boot sequence.
64