Memory
Removing The Memory
1.
Follow the procedures in
Before Working On Your Computer
2.
Remove the
LED cover
.
3.
Use your fingertips to spread apart the securing clips on each end of the memory module connector until the
memory module pops up.
4.
Remove the memory module from its connector on the system board by drawing the module from the system board
at 45-degree angle.
NOTE: To replace the memory, see
Installing The Memory
.
Installing The Memory
NOTE: To remove or locate the memory, see
Removing the Memory
.
1.
Push the memory module into the memory slot.
2.
Press the clips to secure the memory module to the system board.
3.
Install the
LED cover
.
4.
Follow the procedures in
After Working Inside Your Computer
.
41
Summary of Contents for Vostro V130
