About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
Steps
1. Lift the protective tape and peel the Mylar that covers the 2230 solid-state drive.
2. Slide the 2230 solid-state drive into the solid-state drive slot.
3. Slide the solid-state drive bracket and align the screw hole on the solid-state drive bracket with the screw hole on the
system board.
4. Replace the screw (M2x3) that secures the solid-state drive bracket to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Removing the 2280 solid-state drive
Prerequisites
Before working inside your computer
.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Disassembly and reassembly
19
Summary of Contents for Vostro 5301
Page 28: ...28 Disassembly and reassembly ...
Page 41: ...Disassembly and reassembly 41 ...
Page 43: ...Disassembly and reassembly 43 ...
