Dell Vostro 3681 Service Manual Download | Manualshive

Page: 53 / 64

background image

Steps

1. Lay the computer on the right side.
2. Remove the screw (#6-32) that secures the front I/O-bracket to the chassis and remove the front I/O-bracket.
3. Disconnect the 4-pin power supply ATEX connector from the system board.
4. Disconnect the 6-pin power supply ATEX connector from the system board.
5. Disconnect the front I/O cable connector from the system board.
6. Disconnect the SATA cables from the system board.
7. Disconnect the power switch cable from the system board.
8. Remove the eight (#6-32) screws that secure the system board to the chassis.
9. Remove the screw (M2x4) that secures the system board to the chassis.
10. Lift the system board at an angle and remove the system board off the chassis.

Installing the system board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the system board and provides a visual representation of the installation procedure:

Disassembly and reassembly

53

«
...
51
52
53
54
55
...
»

Summary of Contents for Vostro 3681

































































Reviews:

No comments

Related manuals for Vostro 3681

Brand: C&T Pages: 99

Brand: Kontron Pages: 72

Brand: Aaeon Pages: 88

FLEX-BX100-ULT5

Brand: IEI Technology Pages: 121

Adjustable Height Workstation

Brand: Rockler Pages: 8

Brand: dellonda Pages: 6

Brand: Newport Pages: 55

Brand: IBM Pages: 40

Brand: Casio Pages: 143

Brand: Vivo Pages: 12

Brand: Vivo Pages: 3

Brand: HP Pages: 13

Inspiron 22 3000 SERIES

Brand: Dell Pages: 130

Vaio VGN-CR515E

Brand: Sony Pages: 2

VAIO VGN-C270CNH

Brand: Sony Pages: 2

VAIO VGN-BZ570N02

Brand: Sony Pages: 3

VAIO VGN-BZ570N01

Brand: Sony Pages: 3

Vaio VGN-AW11M/H

Brand: Sony Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands