Dell Vostro 3681 Service Manual Download

Page: 31 / 64

Coin cell battery

Removing the coin-cell battery

Prerequisites

1. Follow the procedure in

Before working inside your computer

CAUTION:

Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended

that you note the BIOS setup program’s settings before removing the coin-cell battery.

2. Remove the

side cover

About this task

The following images indicate the location of the coin-cell battery and provides a visual representation of the removal procedure.

Steps

1. Lay the computer on the right side.
2. Push the coin-cell battery-release lever on the coin-cell battery socket to release the coin-cell battery out of the socket.
3. Remove the coin-cell battery.

Installing the coin-cell battery

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the coin-cell battery and provides a visual representation of the installation procedure.

Disassembly and reassembly

Summary of Contents for Vostro 3681

































































Search results

Summary of Contents for Vostro 3681

Reviews:

Related manuals for Vostro 3681

Brands by name

Popular brands

Dell Vostro 3681, Service Manual

Search results

Summary of Contents for Vostro 3681

Reviews:

Related manuals for Vostro 3681

Brands by name

Popular brands