background image

CAUTION: To disconnect a network cable, first unplug the cable from your computer and 
then unplug the cable from the network device.

3.

Disconnect all network cables from the computer.

4.

Disconnect your computer and all attached devices from their electrical outlets.

5.

Press and hold the power button while the computer is unplugged to ground the system board.

6.

Remove the cover.

CAUTION: Before touching anything inside your computer, ground yourself by touching an 
unpainted metal surface, such as the metal at the back of the computer. While you work, 
periodically touch an unpainted metal surface to dissipate static electricity, which could 
harm internal components.

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before 

you turn off your computer.

1.

Shut down the operating system:
• In Windows 8.1:

– Using a touch-enabled device:

a.

Swipe in from the right edge of the screen, opening the Charms menu and select 

Settings

.

b.

Select the 

 and then select 

Shut down

.

Or

* On the Home screen, touch the 

 and then select 

Shut down

.

– Using a mouse:

a.

Point to upper-right corner of the screen and click 

Settings

b.

Click the 

 and select 

Shut down

.

Or

* On the Home screen, click 

 and then select 

Shut down

.

• In Windows 7:

1.

Click 

Start

.

2.

Click 

Shut Down.

or

1.

Click 

Start

.

6

Summary of Contents for Vostro 3252


































Reviews: