manualshive.com logo in svg

Dell Vostro 3252, Owner'S Manual, Page: 17 / 33

Share
Download
Dell Vostro 3252 Owner'S Manual Download Page 17

1.

NGFF connector

2.

Light bar connector

3.

SATA power connector

4.

SATA connector

5.

SATA connector

6.

Coin-cell battery

7.

DC-In jack

8.

Network and USB 2.0 connectors (2)

9.

USB 2.0 connectors (2)

10.

HDMI connector

11.

VGA connector

12.

Line-in, line-out and microphone 

connectors

13.

Fan connector

14.

Memory slot

15.

Power-switch connector

16.

SD card connector

17.

Headset jack

18.

USB 3.0 connector

19.

USB 3.0 connector

Removing the System Board

1.

Follow the procedures in 

Before Working Inside Your Computer

.

2.

Remove:
a.

cover

b.

front bezel

c.

hard-drive assembly

d.

optical drive

e.

coin-cell battery

f.

heatsink assembly

g.

WLAN card

3.

Disconnect the cables from the system board:

4.

Follow the steps to release the I/O panel:
a. Remove the screw that secures the I/O panel to the chassis [1].
b. Press the tab to release the I/O panel from the chassis [2].
c. Pull the I/O panel to release the I/O panel.

17

Summary of Contents for Vostro 3252


































Reviews:

No comments