manualshive.com logo in svg

Dell Vostro 320, Service Manual, Page: 35 / 38

Share
Download
Dell Vostro 320 Service Manual Download Page 35

Back to Contents Page

  

Display Assembly 

Dell™ Vostro™ 320 Service Manual

 

 

 

 

Removing the Display Panel 

 

 NOTE:

 You may need to install Adobe

® 

Flash

® 

Player from 

Adobe.com

 to view the following illustrations. 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

front panel

.  

3.

Remove the 

internal panel

.  

4.

Remove the 

I/O cover

.  

5.

Remove the 

hinged stand

.  

6.

Remove the 

optical drive

.  

7.

Remove the 

back cover

.  

8.

Remove the 

back metal-shielding

.  

9.

Remove the 

system-board shielding

.  

10.

Remove the 

wireless local area network (WLAN) card

.  

11.

Remove the 

memory module

.  

12.

Remove the 

heat sink

.  

13.

Remove the 

processor

.  

14.

Remove the 

system board

.  

15.

Remove the screws that secure the display panel to the computer chassis. 

 

16.

Carefully remove the display panel from the computer. Ensure that you do not damage the cables while removing the display panel from the computer 
chassis. 

 

 

Replacing the Display Panel 

To replace the display panel, perform the above steps in reverse order. 

 

Removing the Display Cable 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

display panel

.  

3.

Release the tape that secures the display cable to the display-panel connector.  

 

4.

Press the securing clips on either side of the display-panel connector, and then pull the cable straight out to remove the cable. 

 

 

Replacing the Display Cable 

To replace the display cable, perform the above steps in reverse order. 

Back to Contents Page

  

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

  

Removing the Display Panel

 

  

Replacing the Display Panel

 

  

Removing the Display Cable

 

  

Replacing the Display Cable

 

Summary of Contents for Vostro 320







































Reviews:

No comments