Back to Contents Page
Front USB Port Assembly
Dell™ Vostro™ 230 Service Manual—
Mini Tower
Removing the Front USB Port Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
Remove the
front bezel
.
4.
Disconnect the USB cable from the system board.
5.
Release the USB cable from its retention clip on the chassis.
6.
Loosen the screws that secure the front USB port assembly to the computer.
7.
Remove the USB port from the computer.
Replacing the Front USB Port Assembly
To replace the front USB port assembly, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Summary of Contents for Vostro 230
Page 8: ......