Dell Vostro 15 3578 Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 83

background image

Option

Description

By default,

Always, Except Internal HDD

is enabled.

Date/Time

Allows you to change the date and time.

Table 7. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options are:

•

Disabled

•

Enabled

•

Enabled w/PXE: This option is enabled by default.

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

•

Disabled

•

AHCI: This option is enabled by default.

Drives

Allows you to configure the SATA drives on board. All drives are enabled by default. The options
are:

•

SATA-0: This option is selected by default.

•

SATA-1: This option is selected by default.

SMART Reporting

This field controls whether hard drive errors for integrated drives are reported during system
startup. This technology is part of the SMART (Self-Monitoring Analysis and Reporting
Technology) specification. This option is disabled by default.

•

Enable SMART Reporting

USB Configuration

This field configures the integrated USB controller. If Boot Support is enabled, the system is
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.

If USB port is disabled, the OS cannot see any device attached to this port.

•

Enable Boot Support: This option is selected by default.

•

Enable External USB Port: This option is selected by default.

NOTE:

USB keyboard and mouse always work in the BIOS setup irrespective of these

settings.

Audio

This field enables or disables the integrated audio controller. The options are:

•

Enable Microphone

•

Enable Internal Speaker

NOTE:

All devices are enabled by default.

Miscellaneous Devices

Allows you to enable or disable the following devices:

•

Enable Camera

•

Enabled Secure Digital (SD) Card

NOTE:

All devices are enabled by default.

System setup

61

«
...
59
60
61
62
63
...
»

Summary of Contents for Vostro 15 3578




















































































Reviews:

No comments

Related manuals for Vostro 15 3578

Brand: Twinhead Pages: 57

Brand: Medion Pages: 90

Brand: Acer Pages: 86

Brand: Philips Pages: 1

Brand: Philips Pages: 7

Brand: Philips Pages: 51

Brand: Dell Pages: 132

CF-52CCABXBM - Toughbook 52 - Core 2 Duo 1.8 GHz

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

CF-29 - TOUGHBOOK RUGGED LAPTOP 1.4Ghz PM 512MB 40GB CD wifi

Brand: Panasonic Pages: 7

Brand: Panasonic Pages: 9

CF-19CDBAXVM - Toughbook 19 Tablet PC Version

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands