30
│
Setting up the monitor
• Use the
button to select
Disable
and change the settings.
Repeat the above steps to change the DisplayPort format settings if
necessary.
Connecting the HDMI cable (optional)
NOTE: The default out of factory setting is HDMI 2.0. If the monitor
fails to show any content after the HDMI cable is connected, follow the
procedures below to change the settings from HDMI 2.0 to HDMI 1.4:
• Press any button (except the
button) to activate the OSD menu.
• Use the
and
buttons to highlight
Input Source
, then use the
button enter the submenu.
• Use the
and
buttons to highlight
HDMI
.
• Press and hold the
button for approximately 10 seconds, and the HDMI
configuration message appears.
• Use the
button to select
Disable
and change the settings.
