Dell UltraSharp U3219Q User Manual Download Page 66

Page: 66 / 69

Common

symptoms

What you

experience

Possible solutions

Screen image is too
small

Image is centered
on screen, but
does not fill entire
viewing area

• Check the

Aspect Ratio

setting in the

Display

menu OSD.

• Reset the monitor to factory settings.

Cannot adjust the
monitor with the
buttons on the
front panel

OSD does not
appear on the
screen

• Turn Off the monitor, unplug the power

cord, plug it back, and then turn On
the monitor.

No Input Signal
when user controls
are pressed

No picture, the
LED light is white

• Check the signal source. Ensure the

computer is not in the power saving
mode by moving the mouse or pressing
any key on the keyboard.

• Check whether the signal cable is

plugged in properly. Re-plug the signal
cable if necessary.

• Reset the computer or video player.

The picture does
not fill the entire
screen

The picture cannot
fill the height or
width of the screen

• Due to different video formats (aspect

ratio) of DVDs, the monitor may display
in full screen.

• Run the built-in diagnostics.

│

Troubleshooting

Product specific problems

Summary of Contents for UltraSharp U3219Q






































































Search results

Summary of Contents for UltraSharp U3219Q

Reviews:

Related manuals for UltraSharp U3219Q

Brands by name

Popular brands

Dell UltraSharp U3219Q, User Manual

Search results

Summary of Contents for UltraSharp U3219Q

Reviews:

Related manuals for UltraSharp U3219Q

Brands by name

Popular brands