About Your Monitor
|
19
Universal Serial Bus (USB)
This section gives you information about the USB ports available on your monitor.
NOTE:
Up to 2 A on USB downstream port (port with
battery icon) with BC
1.2 compliance devices; Up to 3 A on USB Type-C downstream port (port with
icon) with 5 V/3 A compliance devices.
Your computer has the following USB ports:
• 4 downstream - 2 at left side, 2 at bottom side.
Power Charging Port - the ports with
battery icon supports fast current
charging capability if the device is BC 1.2 compatible.The USB Type-C downstream
port with
icon supports fast current charging capability if the device is 5V/3A
compatible.
NOTE:
The monitor’s USB ports work only when the monitor is on or in the power save
mode. In power save mode, if the USB cable (Type-C to Type-C) is plugged in, the USB
ports can work normally.
Otherwise, follow the OSD setting of USB, if the setting is “On
During Standby” then USB work normally, otherwise USB is disabled. If you turn off the
monitor and then turn it on, the attached peripherals may take a few seconds to resume
normal functionality.
Transfer speed
Data rate
Maximum power consumption
(each port)
SuperSpeed
5 Gbps
4.5 W
Hi-Speed
480 Mbps
2.5 W
Full speed
12 Mbps
2.5 W
USB downstream port
Pin number
Signal
Pin number
Signal
1
VBUS
6
St
2
D-
7
GND_DRAIN
3
D+
8
StdA_SSTX-
4
GND
9
St
5
StdA_SSRX-
Shell
Shield
