Dell UltraSharp 25 Series User Manual Download Page 68

Page: 68 / 71

│

Troubleshooting

Product specific problems

Common

symptoms

What you

experience

Possible solutions

Screen image is too
small

Image is centered on
screen, but does not
fill entire viewing
area

• Check the

Aspect Ratio

setting in

the

Display

menu OSD.

• Reset the monitor to factory settings.

Cannot adjust the
monitor with the
buttons on the
front panel

OSD does not
appear on the screen

• Turn Off the monitor, unplug the

power cord, plug it back, and then
turn On the monitor.

• Check whether the OSD menu is

locked. If yes, press and hold the
Menu/function button next to the
Power button for 4 seconds to unlock
(for more information, see

Lock

No Input Signal
when user controls
are pressed

No picture, the LED
light is white

• Check the signal source. Ensure the

computer is not in the power saving
mode by moving the mouse or
pressing any key on the keyboard.

• Check whether the signal cable is

plugged in properly. Re-plug the
signal cable if necessary.

• Reset the computer or video player.

The picture does
not fill the entire
screen

The picture cannot
fill the height or
width of the screen

• Due to different video formats

(aspect ratio) of DVDs, the monitor
may display in full screen.

• Run the built-in diagnostics.

No video at HDMI/
DisplayPort/USB
Type-C port

When connected to
some dongle/
docking device at
the port, there is no
video when
unpluging/pluging
the Thunderbolt
cable from the
notebook

• Unplug the HDMI/DisplayPort/USB

Type-C cable from dongle/docking
device, then plug the docking
Thunderbolt cable to the notebook.
Plug the HDMI/DisplayPort/USB
Type-C cable 7 seconds later.

Summary of Contents for UltraSharp 25 Series








































































Search results

Summary of Contents for UltraSharp 25 Series

Reviews:

Related manuals for UltraSharp 25 Series

Brands by name

Popular brands

Dell UltraSharp 25 Series, User Manual

Search results

Summary of Contents for UltraSharp 25 Series

Reviews:

Related manuals for UltraSharp 25 Series

Brands by name

Popular brands