Dell UltraSharp 25 Series User Manual Download Page 13

Page: 13 / 71

About your monitor

│

*Headphone usage is not supported for the audio line out connector.

**To avoid signal interference, when a wireless USB device has been connected to
a USB downstream port, it is NOT recommended to connect any other USB
devices to the adjacent port(s).

DisplayPort (out)

DisplayPort output for MST (multi-stream
transport) capable monitor. To enable MST,
see “

Connecting the monitor for DP Multi-

Stream Transport (MST) function

”.

NOTE:

Remove the rubber plug when using

DisplayPort out connector.

Audio line-out port

Connect your speakers.*

USB downstream port
(2)

Connect your USB device.**

NOTE:

To use this port, you must connect

the USB Type-C cable (shipped with your
monitor) to the USB Type-C upstream port
on the monitor and to your computer.

Summary of Contents for UltraSharp 25 Series








































































Search results

Summary of Contents for UltraSharp 25 Series

Reviews:

Related manuals for UltraSharp 25 Series

Brands by name

Popular brands

Dell UltraSharp 25 Series, User Manual

Search results

Summary of Contents for UltraSharp 25 Series

Reviews:

Related manuals for UltraSharp 25 Series

Brands by name

Popular brands