42
Power Management
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
Hibernate Mode
Hibernate mode conserves power by copying system data to a reserved area on the hard drive
and then completely turning off the computer. When the computer exits hibernate mode, it
returns to the same operating state it was in before entering hibernate mode.
NOTICE:
You cannot remove devices while your computer is in hibernate mode.
Your computer enters hibernate mode if the battery charge level becomes critically low.
To manually enter hibernate mode, click the
Start
button, click
Turn off computer
, press and
hold <Shift>, and then click
Hibernate
. Depending on how you set the power management
options on the
Advanced
tab
in the
Power Options Properties
window, use one of the following
methods to enter hibernate mode:
• Press the power button.
• Close the display.
• Press <Fn><Esc>.
NOTE:
Some ExpressCards may not operate correctly after the computer exits hibernate mode. Remove
and reinsert the card, or simply restart (reboot) your computer. See "Installing an ExpressCard" on
page 67.
To exit hibernate mode, press the power button. The computer may take a short time to exit
hibernate mode. You cannot make the computer exit hibernate mode by pressing a key or
touching the touch pad. For more information on hibernate mode, see the documentation that
came with your operating system.
Power Options Properties
The
Power Options Properties
window helps you to manage power consumption and monitor
battery charge status. To access the Windows
Power Options Properties
window, click the
Start
button, point to
Control Panel
→
Performance and Maintenance
, and click
Power Options
.
Power Schemes Tab
The
Power schemes
drop-down menu displays the selected preset power scheme. Keep the
default
Portable/Laptop
power scheme to maximize battery power.
Windows XP controls the performance level of the processor depending on the power scheme
you select. You do not need to make any further adjustments to set the performance level.
Each preset power scheme has different time-out settings for entering standby mode, turning
off the display, and turning off the hard drive. For more information on power management
options, see the Windows Help and Support Center. To access the Help and Support Center, see
page 13
.
book.book Page 42 Wednesday, October 26, 2005 1:00 PM