48
Solving Problems
Beep Codes
Your computer might emit a series of beeps
during start-up if there are errors or problems.
This series of beeps, called a beep code,
identifies a problem. If this occurs, write
down the beep code and contact Dell (see
“Contacting Dell” on page 77).
NOTE:
To replace parts, see the
Service
Manual
at
support.dell.com/manuals
.
Beep Code Possible Problem
One
Possible system board failure —
BIOS ROM checksum failure
Two
No RAM detected
NOTE:
If you installed or
replaced the memory module,
ensure that the memory module
is seated properly.
Three
Possible system board failure —
Chipset error
Four
RAM read/write failure
Five
Real Time Clock failure
Six
Video card or chip failure
Seven
Processor failure
Eight
Display failure
Downloaded from LpManual.com Manuals
Summary of Contents for Studio P02E
