Dell Studio 1557 Service Manual Download Page 8

Page: 8 / 49

Back to Contents Page

Center Control Cover

Dell Studio™ 1557/1558 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

Removing the Center Control Cover

Follow the instructions in

Before You Begin

In the battery bay, remove the screw that secures the center control cover.

Turn the computer over and open the display as far as possible.

Pry out the center control cover with a plastic scribe starting from the battery bay location at the back of the computer.

Ease the center control cover up.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

center control cover

Summary of Contents for Studio 1557


















































Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands

Dell Studio 1557, Service Manual

Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands