Dell Studio 1557 Service Manual Download Page 13

Page: 13 / 49

Back to Contents Page

Processor Heat Sink

Dell Studio™ 1557/1558 Service Manual

Removing the Processor Heat Sink

Replacing the Processor Heat Sink

Removing the Processor Heat Sink

Follow the instructions in

Before You Begin

Remove the optical drive (see

Removing the Optical Drive

Disconnect the ExpressCard cables from their respective connectors on the system board (see

Removing the ExpressCard Board

Disconnect the AC adapter connector cable, USB cable, fan cable, and the subwoofer cable from their respective connectors on the system board (see

Removing the System Board Assembly

Remove the six screws that secure the system board to the computer base.

Turn the system board over.

In sequential order (indicated on the processor heat sink), loosen the four captive screws on the thermal-cooling assembly processor cover.

Lift the processor heat sink off the computer.

Replacing the Processor Heat Sink

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the processor

heat sink.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

captive screws (4)

processor heat sink

NOTE:

The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is

replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

Summary of Contents for Studio 1557


















































Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands

Dell Studio 1557, Service Manual

Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands